Architectural Sheet Metal CADD Drawings
      Architectural Sheet Metal Inspection Guide
      Architectural Sheet Metal Manual
      Architectural Sheet Metal Quality Assurance Guide
      Figure 1-1 Rectangular Gutter Designs
      Figure 1-10 Built-In Expansion Joint — Heavy Gage Gutter
      Figure 1-11 Combination Scupper and Gutter
      Figure 1-12 Hanging Gutter Installations — General
      Figure 1-13 Hanging Gutter Installations — Bracket Support
      Figure 1-14 Hanging Gutter Installations — Alternate Support
      Figure 1-15 Concealed Hanging Gutters
      Figure 1-16 Hanging Gutter Installations — Heavy Gutter
      Figure 1-17 Hanging Gutter Installations — Sloped Roof
      Figure 1-18 Hanging Gutter Installations — Sloped Roof
      Figure 1-19 Hanging Gutter Installations — Sloped Roof
      Figure 1-2 Rectangular Gutter Styles
      Figure 1-20 Hanging Gutter Installations — Half Round
      Figure 1-21 Built-in Gutter Installation
      Figure 1-22 Water Diverter Design and Installation
      Figure 1-23 Built-in Gutter Installation
      Figure 1-24 Gutter Accessories — Screens and Outlets
      Figure 1-25 Conductor Heads — Typical
      Figure 1-26 Scupper Design and Installation
      Figure 1-27 Scupper Design and Installation
      Figure 1-28 Scupper — Through Fascia With Conductor Head
      Figure 1-29 Scupper — Design and Installation
      Figure 1-3 Manufactured Half Round and Ogee Gutters
      Figure 1-30 Scupper — Overflow Type — Design & Installation
      Figure 1-31 Downspouts - Manufactured
      Figure 1-32 Downspouts — Shop Fabricated
      Figure 1-33 Downspout — Gutter Connections
      Figure 1-34 Downspouts - Hanger Design
      Figure 1-35 Shop-Fabricated Downspout Hangers
      Figure 1-36 Splash Pan
      Figure 1-37 Formed Roof Sumps
      Figure 1-38 Roof Drains
      Figure 1-4 Built-In Gutter Design
      Figure 1-5 Allowances for Gutter Expansion
      Figure 1-6 Lap Type Gutter Expansion Joint
      Figure 1-7 Butt Type Gutter Expansion Joint
      Figure 1-8 Built-In Gutter Expansion Joint
      Figure 1-9 Built-In Gutter Expansion Joint — at Wall
      Figure 10-1 Column Covers
      Figure 10-2 Corner Guards
      Figure 10-3 Interior Wall Lining
      Figure 10-4 Partition and Column Closures and Mullion Covers
      Figure 10-5 Planter Box Liners
      Figure 10-6 Drapery Pockets
      Figure 10-7 Lighting Troughs
      Figure 10-8 Hoods — Ornamental
      Figure 10-9 Linen and Trash Chutes
      Figure 11-1 Roof Scuttles
      Figure 11-2 Smoke Hatches
      Figure 11-3 Curtains — Draft or Fire
      Figure 11-4 Cornerstone Boxes
      Figure 11-5 Snow Guards
      Figure 12-1 Cornice Assembly at Parapet
      Figure 12-2 Cornice Assembly With Gutter
      Figure 12-3 Formed Skylights
      Figure 12-4 Formed Skylight-Mutin
      Figure 12-5 Spires
      Figure 12-6 Cupolas
      Figure 12-7 Copper Dome
      Figure 2-1 Formed Gravel-Stop Fascia — Design Data
      Figure 2-10 Heavy-Gage Gravel-Stop Fascia—Joints and Corners
      Figure 2-11 Heavy-Gage Gravel-Stop Fascia — Installations
      Figure 2-12 Roof Paver Retention
      Figure 2-13 Roof Membrane Protection
      Figure 2-14 Roof Paver Systems — Outer Edge
      Figure 2-15 Roof Paver Systems — Edge Retention
      Figure 2-16 Roof Paver Systems — Scupper Drain
      Figure 2-2 Formed Gravel-Stop Fascia — Design Data
      Figure 2-3 Roof-Fascia-Soffit Transitions
      Figure 2-4 Fascia and Soffit Design Data
      Figure 2-5 Formed Gravel-Stop Fascia — Joint Systems
      Figure 2-6 Cap Fascia - Installation
      Figure 2-7 Formed Gravel-Stop Fascia — Soffit Installation
      Figure 2-8 Formed Gravel-Stop Recessed — Installation
      Figure 2-9 Heavy-Gage Formed Gravel-Stop Fascia
      Figure 3-1 Formed Metal Copings — Design Data
      Figure 3-2 Locks and Seams Design Data
      Figure 3-3 Locks and Seams Design Data
      Figure 3-4 Formed Metal Copings — Typical Profiles
      Figure 3-5 Formed Metal Copings — Curved
      Figure 3-6 Formed Metal Copings — With Flashing
      Figure 3-7 Formed Metal Copings and Relief Joint
      Figure 3-8 Formed Metal Copings — Dual Walls
      Figure 3-9 Parapet Wall Covering
      Figure 4-1 Through-Wall Flashing — Installation
      Figure 4-10 Valley Flashing Installation
      Figure 4-11 Valley Flashing Installation
      Figure 4-12 Hip and Ridge Flashing
      Figure 4-13 Ridge Flashing at Mansard Roof
      Figure 4-14 Chimney Flashing
      Figure 4-15 Chimney Flashing (Stucco)
      Figure 4-16 Ledge Flashing
      Figure 4-17 Dormer-Head Sill Flashing for Frame Construction
      Figure 4-18 Shingle Roof Flashing
      Figure 4-19 Termite Shields
      Figure 4-2 Through-Wall Flashing — Cavity Wall